Download page for ScadaPhone (Alarm Dialer) ::

Files in the table below with '.exe' extension are self extracting zipped files. Files with '.zip' extension will need to be unzipped with an unzip utility. NOTE: These files do not contain any adware or spyware, only our demo software.

Downloadable software is full featured and is fully operational for the trial period. You will be asked to login in order to download exe files. An Authorization Code will be issued after your order is placed.

 

Files requiring LogIn version/size description
ScadaPhone Install program Full or Lite version

ver 5.0.26.415

11.0 MB

Executive file that has both the lite & full version, development & runtime. Includes, sample project file , full voice library, help files, & tutorial. Normally, an external modem & microphone is provide. Testing and development may be done without the modem by using a PC sound card. An internal modem is available. Starting with ver 5.0.26, ScadaPhone can now reach across a network to read/write to multiple SCADA nodes using our OPCHub without the need to configure DCOM.
Our Data Sheet describes the features & specification. This is an upgrade from older versions.

 

ScadaPhone Exe Only

ver 5.0.26.415

1.73 MB

This ZIP file has only the updated ScadaPhone.exe program and the Memus.txt file. A number of minor edits and improvements have been incorporated. Your existing projects are upward compatible.

This version includes our OPCHub interface which allows ScadaPhone to communicate to multiple SCADA nodes located around your ethernet network. You will need to have our OPCHub on each remote SCADA node. The OPCHub acts as an OPC client to collect TAG data from a SCADA software such as iFix, RSView, Wonderware, Citect, etc.

When updated versions 4.8.* & older, the included "Menus.txt" file must be moved to the "SystemFiles" directory for the new alarm menu features to work properly. If your version already have this file, you do not need to over right it with this one.

ScadaPhone support files

ver 5.0

1.2 MB

A zip file with various support files. To use, unzip this file into the directory that contains scadaphone.exe and replace the current files with these.

 

OPCHubInstall.exe

ver 2.0.8.192

2.96 MB

This file will install our OPC Hub which is used with ScaadaPhone to collect TAG data from various SCADA nodes over a network. Our OPCHub resides on the same Windows PC as you SCADA software and acts as an OPC client to it. . With our OPCHub on each SCADA node, ScadaPhone can now retrieve alarm data from multiple SCADA nodes on your ethernet network. Our software only needs the I.P. address of each SCADA node and eliminates the configuration issues associated with Window DCOMM. The TTP protocol uses block trasnfer techniques and is very fast, thus minimizing the traffic load on the network. Help files and applciations notes are available separatly from our Sales department

 

File (no login in required)

version/size description
Doc16-Install & Quick Start Procedure.pdf

Ver5.0.3 428KB

This procedure covers how to install ScadaPhone and test that it is working properly.

ScadaPhone_HelpFiles

Printable version

ver 5.0.8.101 1.2MB
ver 5.0.8.101
1.3MB

Installs in the same folder as “ScadaPhone.exe”. Provides Windows on-line help information. (Zip File)

This is a printable version of the on-line help files(PDF File)

ScadaPhone Sample Project (zip)

Jan 06

1.4MB

A sample project that demonstrates most of ScadaPhone features. This project is included in the full install file.
ScadaPhone Tutorial -

ver 4.8

328KB

Context sensitive help for ScadaPhone. To use these files with ScadaPhone running, unzip into the directory called "Help Files" under the directory in which the ScadaPhone.exe file resides. The Tutorial displays in your browser & can be viewed separately
Modem Drivers   See the modems page for a discussion of modems. The Apache & MultiTech external modems are the current standard modems shipped within the USA. If you have an older US Robotics or Zoom modem, contact us for an replacement or to obtain current drivers.
Apache Drivers 320KB These drivers are not needed by ScadaPhone. They must be installed only when a remote excess software such as PcAnywhere is used.

MultiTech Drivers

28KB

 
Voice file library 3.1MB These are the *.wav files found on our Install CD. They are to be installed in the 'System Files' folder that is under the folder containing the "ScadaPhone.exe" file.
ScadaPhone New Voice Files 1.3MB Added wav files to be placed in the [SystemFiles] directory. Some of these files are used by ver 4.9.7. Files are compatible with older version of ScadaPhone.